1.5 – CAD Practice Exercise
Find the total area of the green/yellow shaded area. Resources
2D CAD
1.3 – CAD Practice Exercise
Find the total area of the shaded area. The final sketch should be fully closed (constrained) Resources
How To Use Geometric Constraints in Fusion 360 2D CAD
Constraints in sketches The tools in the Sketch > Constraints panel let you constrain sketches by controlling the relative position of sketch geometry in Fusion 360. You can use the following commands to constrain sketches: Horizontal/Vertical Coincident Tangent Equal Parallel Perpendicular Fix/UnFix Midpoint Concentric Collinear Symmetry Curvature Note: Before you can create sketch geometry, you must use the Create …
How To Use Geometric Constraints in Fusion 360 2D CAD Read More »
1.1 – CAD Practice Exercise
Find the area of the white space. Hover over image to reveal the answer. Resources
2D CAD: Draw Better Curves with Splines & The Conic Curve
The spline tools in the Sketch > Create panel let you create different types of splines as sketch geometry or construction geometry in an active sketch in Fusion 360. A spline is a smooth, freeform curve that passes through or near a set of points that influence the shape of the curve. There are two kinds of …
2D CAD: Draw Better Curves with Splines & The Conic Curve Read More »
2D CAD: How To Make All Kinds Of Slots
The slot tools in the Sketch > Create panel let you create different types of slots as sketch geometry or construction geometry in an active sketch in Fusion 360.